LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (42RLE Automatic Transmission - Electrical Diagnostics) >> Electrical Diagnostics >> DTC Troubleshooting >> U0141 Lost Communication With FCM >> Theory Of Operation

Theory Of Operation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

The NGC controller communicates over the CAN C bus. The transmission controller continuously monitors bus activity. The CAN C bus is also used to communicate transmission MIL status to the Engine Controller. If the Engine Controller is unable to communicate with the Transmission Controller, a DTC will set and the Engine Controller will illuminate the MIL.

Refer to  ELECTRONIC CONTROL MODULES - ELECTRICAL DIAGNOSTICS  for diagnostic procedures and for further possible causes.