LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (Nag1 Automatic Transmission - Electrical Diagnostics) >> Electrical Diagnostics >> DTC Troubleshooting >> P2783-Torque Converter Temperature Too High >> Monitor Conditions

Monitor Conditions

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. When Monitored: 

    When the solenoid supply voltage is active. With no reporting Input Speed Sensor 1 or 2 (N2 - N3), CAN Bus, PCM, CAN Engine, and/or CAN Engine Speed DTCs present. Torque Converter Clutch in slip mode.

scientia non olet · About LEMON Manuals