Headlamp Washer: Operation
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
The headlamp washer system utilizes a separate high pressure pump that is attached to the windshield washer reservoir. The headlamp washer pump feeds nozzles that are mounted in the front fascia of the vehicle. The nozzles are aimed in front of the headlamp assembly. These nozzles spray the headlamps when the system is activated.
To activate the headlamp washers, turn ON the headlamps and then press the front windshield washer control knob. This will operate the windshield washers and direct one, timed high pressure sprays onto the headlamp lens.