LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Wiper System & Washer System (Service Information)) >> Headlamp Washer >> Installation

Headlamp Washer: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Headlamp Washer Hose
GC0016741Courtesy of DAIMLERCHRYSLER CORP.
  1. Install headlamp washer to front fascia (1).
  2. Attache washer hose (2) to headlamp washer fitting (3).
  3. Install front fascia (1) (Refer to FRAME & BUMPERS/BUMPERS/FRONT FASCIA - INSTALLATION) .
  4. Connect battery negative cable.