LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Wiper System & Washer System (Service Information)) >> Check Valve >> Installation

Check Valve: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Washer Check Valve
GC0016708Courtesy of DAIMLERCHRYSLER CORP.
  1. Insert check valve into washer hose.
  2. Install lower liftgate trim panel (Refer to BODY/DECKLID/HATCH/LIFTGATE/TAILGATE/TRIM PANEL - INSTALLATION) .
  3. Connect battery negative cable.
scientia non olet · About LEMON Manuals