LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (DTCS B1B1A To B1B82) >> Diagnosis And Testing >> B1B56-1ST Row Passenger Seat Belt Sensor Circuit Open >> Monitor Conditions

Monitor Conditions

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. When Monitored: 

    With the ignition on and the Occupant Restraint Controller (ORC) ignition voltage above 6.6 volts, the ORC performs a series of passive and active current tests on the Passenger Seat Belt Switch circuits. The passive and active tests are repeated every 1.26 seconds.

scientia non olet · About LEMON Manuals