LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Power Seat System) >> Power Seat Switch >> Removal

Power Seat Switch: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
  2. Remove two screws to left cushion side shield.
  3. Disconnect wiring from switch.
  4. Remove attaching screws and switch from bezel.
scientia non olet · About LEMON Manuals