LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Power Seat System) >> Power Seat Switch >> Installation

Power Seat Switch: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install switch and two attaching screws to bezel.
  2. Connect wiring to switch.
  3. Install screws to left cushion side shield.
  4. Connect the battery negative cable.
  5. Verify system operation.
scientia non olet · About LEMON Manuals