LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Power Seat System) >> Lumbar >> Removal

Section 131 (Power Seat System): Lumbar: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Pt Lumbar Assembly
GC0022970Courtesy of DAIMLERCHRYSLER CORP.
  1. Partially remove the seat back trim cover from the seat back frame, (Refer to BODY/SEATS/SEAT BACK COVER - REMOVAL) for the procedure.
  2. Disconnect the lumbar mechanism spring (3) and disconnect the cable (2) from the lumbar assembly (1).
  3. Unsnap the lumbar assembly (1) from the seat back frame and remove from the seat.
scientia non olet · About LEMON Manuals