LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Power Door Lock System (Service Information)) >> Liftgate Lock Motor >> Removal

Liftgate Lock Motor: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Liftgate Lock Motor
GC0022957Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the battery negative cable.
  2. Remove liftgate trim panel.
  3. Disconnect motor wire harness connector.
  4. Remove liftgate lock motor (2) from liftgate by gently unsnapping.
scientia non olet · About LEMON Manuals