LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Power Door Lock System (Service Information)) >> Door Lock Switch >> Removal

Door Lock Switch: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
  2. Remove front door trim panel (Refer to BODY/DOOR - FRONT/TRIM PANEL - REMOVAL) .
  3. Disconnect wire connector to door lock switch.
  4. Remove two attaching screws to switch.
  5. Remove the switch from trim panel.
scientia non olet · About LEMON Manuals