LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Power Door Lock System (Service Information)) >> Door Lock Switch >> Installation

Door Lock Switch: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the switch on trim panel.
  2. Install two attaching screws to switch.
  3. Connect wire connector to door lock switch.
  4. Install front door trim panel (Refer to BODY/DOOR - FRONT/TRIM PANEL - INSTALLATION) .
  5. Connect the battery negative cable.
scientia non olet · About LEMON Manuals