LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Power Door Lock System (Service Information)) >> Door Lock Switch >> Diagnosis And Testing >> Diagnosis And Testing - Door Lock Switch

Diagnosis And Testing - Door Lock Switch

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the switch.
  2. Using an ohmmeter, refer to Door Lock Switch Test table below to determine if switch resistance is correct in the Lock and Unlock switch positions. Refer to SYSTEM WIRING DIAGRAMS and CONNECTOR/GROUND/SPLICE LOCATION for harness connector pin-outs.
DOOR LOCK SWITCH TEST

SWITCH POSITION PINS RESISTANCE VALUE
LOCK 2 AND 3 1K OHM +/-10 %
UNLOCK 2 AND 3 249 OHM +/- 10 %
scientia non olet · About LEMON Manuals