Solenoid-Proportional Purge: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Location Of Bracket On 5.7L Engine

Courtesy of DAIMLERCHRYSLER CORP.

The solenoid attaches to a bracket near the right rear of the engine. The solenoid will not operate unless it is installed correctly.

Location for 5.7L engine.

Fig 2: Location Of Bracket On 2.7L & 3.5L Engine
Courtesy of DAIMLERCHRYSLER CORP.
Location for 2.7 and 3.5L engine.
Disconnect electrical connector from solenoid.
Disconnect vacuum tubes from solenoid.
Remove solenoid from bracket.