Section 124 (Clutch System): Flywheel: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Flywheel And Crankshaft Flange

Courtesy of DAIMLERCHRYSLER CORP.

1 - FLYWHEEL

2 - BOLT (8)

3 - CRANKSHAFT FLANGE

Remove transaxle,
- For G288 M/T, (Refer to TRANSMISSION/TRANSAXLE/MANUAL - REMOVAL) .
- For T350 M/T, (Refer to TRANSMISSION/TRANSAXLE/MANUAL - REMOVAL) .
Remove clutch pressure plate and disc, (Refer to CLUTCH/CLUTCH DISC - REMOVAL) .
Remove eight (8) flywheel-to-crankshaft bolts (2). See Fig 1 and remove flywheel assembly (1).