LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Clutch System) >> Clutch Interlock/UPSTOP Switch >> Diagnosis And Testing >> Diagnosis And Testing-Clutch Interlock/UPSTOP Switch >> UPSTOP Switch >> Mechanical Test (1.6L and 2.2L Turbo Diesel Models)

Mechanical Test (1.6L and 2.2L Turbo Diesel Models)

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise vehicle on hoist.
  2. Start engine and operate speed control to maintain speed.
  3. Depress clutch pedal at least 33 mm (1.30 in.). Speed control operation should terminate. If speed control does not terminate, the upstop switch is defective or the related wiring is shorted. Proceed to the DIAGNOSIS AND TESTING-CLUTCH INTERLOCK/UPSTOP SWITCH .
scientia non olet · About LEMON Manuals