2.2L TD

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Clutch Disc and Pressure Plate

Courtesy of DAIMLERCHRYSLER CORP.

1 - FLYWHEEL (DUAL-MASS)

2 - CLUTCH DISC

3 - PRESSURE PLATE

Remove transaxle,
- For G288 M/T, (Refer to TRANSMISSION/TRANSAXLE/MANUAL - REMOVAL) .
- For T350 M/T, (Refer to TRANSMISSION/TRANSAXLE/MANUAL - REMOVAL) .
Mark position of pressure plate (3) on flywheel (1) with paint or a scriber for assembly reference. See Fig 1.
Loosen and remove six pressure plate-to-flywheel bolts. Remove pressure plate (3) and clutch disc (2).

Fig 2: Flywheel-To-Crankshaft Bolt Pattern
Courtesy of DAIMLERCHRYSLER CORP.

1 - FLYWHEEL ASSEMBLY
Remove eight flywheel-to-crankshaft bolts and remove flywheel assembly (2). See Fig 2.