Vacuum Reservoir: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Vacuum Reservoir

Courtesy of DAIMLERCHRYSLER CORP.

1 - VACUUM RESERVOIR

The vacuum reservoir is located in the right front fender well on the frame rail. It is made of plastic.

Connect hoses to reservoir.

Fig 2: Reservoir Mounting Screws
Courtesy of DAIMLERCHRYSLER CORP.
Install reservoir and tighten screws to 5 N.m (45 in. lbs.).

Fig 3: Inner Splash Shield
Courtesy of DAIMLERCHRYSLER CORP.
Install the inner splash shield.
Lower vehicle.
Install the negative battery cable.
Install the air cleaner lid, connect the inlet air temperature sensor and makeup air hose.