Operation - Checking For Diagnostic Codes
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
When trying to verify a speed control system electronic malfunction: Connect a scan tool if available to the data link connector. The connector is located near the steering column, and at lower edge of the dash panel.
A speed control malfunction may occur without a diagnostic code being indicated. For further information and usage of the scan tool and a more complete list of Diagnostic Trouble Code and No Trouble Codes, refer to 1.6L - DTCS B2277 TO P0131, DIAGNOSTIC CODE INDEX, PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE & INTERMITTENT CONDITION or 2.4L - DTCS P0016 TO P0125, DIAGNOSTIC CODE INDEX, PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE & INTERMITTENT CONDITION .