LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Wiring Diagram Information) >> Wiring Diagram Information >> Standard Procedure >> Standard Procedure - Testing For A Short To Ground On Fuses Powering Several Loads

Standard Procedure - Testing For A Short To Ground On Fuses Powering Several Loads

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Refer to the SYSTEM WIRING DIAGRAMS and disconnect or isolate all items on the suspected fused circuits.
  2. Replace the blown fuse.
  3. Supply power to the fuse by turning ON the ignition switch or re-connecting the battery.
  4. Start connecting or energizing the items in the fuse circuit one at a time. When the fuse blows the circuit with the short to ground has been isolated.
scientia non olet · About LEMON Manuals