LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Exhaust System) >> Motor-Boost Pressure Servo >> Removal >> Servomotor

Motor-Boost Pressure Servo: Removal: Servomotor

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Servomotor
GC0039548Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the negative battery cable.
  2. Remove the air cleaner housing.
  3. Remove the turbo heat shield.
  4. Remove circlip from actuator rod at turbocharger end (2). See Fig 1.
  5. Remove mounting bolts and remove servomotor and actuator rod(3). See Fig 1.
  6. Remove circlip and actuator rod from servomotor(1). See Fig 1.
scientia non olet · About LEMON Manuals