LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Wiper System & Washer System (Service Information)) >> Service Information >> Diagnosis And Testing >> Front Wiper Conditions >> Motor Operates Slowly At All Speeds

Motor Operates Slowly At All Speeds

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove wiper arms and cowl screen. Disconnect motor linkage from motor. Connect an ammeter between battery positive terminal and terminal 4 of the motor connector. Turn wiper motor on and check ampere reading.

    If motor runs and ammeter reading is more than 6 amps, go to step  2. If less than 6 amps, go to step  3.

  2. Using an ohmmeter, check the high and low circuits for a short to ground. Refer to SYSTEM WIRING DIAGRAMS .
  3. Check to see if wiper linkage or pivots are binding or caught.