LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Wiper System & Washer System (Service Information)) >> Rear Washer Nozzle >> Removal

Rear Washer Nozzle: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Center High Mounted Stop Lamp And Cover
GC0022434Courtesy of DAIMLERCHRYSLER CORP.
  1. Open liftgate.
  2. Remove liftgate CHMSL access panel (Refer to BODY/DECKLID/HATCH/LIFTGATE/TAILGATE/CHMSL COVER PANEL - REMOVAL) .
  3. Disconnect the rear washer hose at nozzle.
  4. Remove the nut retaining the rear washer nozzle and remove the nozzle from rear window glass and vehicle.
scientia non olet · About LEMON Manuals