LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Wiper System & Washer System (Service Information)) >> Rear Washer Nozzle >> Installation

Rear Washer Nozzle: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Center High Mounted Stop Lamp And Cover
GC0022434Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the nozzle into rear window opening and retaining nut to the rear washer nozzle and torque to 2.8 N.m (25 in. lbs.).
    NOTE: Verify that the nozzle is pointing straight down.
  2. Connect the rear washer hose at nozzle.
  3. Install liftgate CHMSL access panel (Refer to BODY/DECKLID/HATCH/LIFTGATE/TAILGATE/CHMSL COVER PANEL - INSTALLATION) .
  4. Close liftgate.
scientia non olet · About LEMON Manuals