LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Wiper System & Washer System (Service Information)) >> Front Washer Nozzle >> Removal

Front Washer Nozzle: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open hood.
  2. Remove the rear underhood silencer pad fasteners.
  3. Disconnect the washer hose from the underside of the front washer nozzle.
  4. Lower hood down.
  5. Using a plastic body filler spreader or equivalent (credit card), gently place it underneath the front of the washer nozzle. Be careful not to damage the hood seal underneath the nozzle.
  6. Rock the nozzle back and forth slightly to release it from the hood panel.
scientia non olet · About LEMON Manuals