LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Wiper System & Washer System (Service Information)) >> Front Washer Nozzle >> Installation

Front Washer Nozzle: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the nozzle into hood opening and snap into place.
  2. Open hood.
  3. Connect the washer hose to the underside of the washer nozzle.
  4. After connecting hose, check for proper system function and to assure leak free connections by actuating the front washer system switch from inside of vehicle.
  5. Install the underhood, rear hood silencer pad fasteners.
  6. Close hood.
  7. Verify system operation.
scientia non olet · About LEMON Manuals