LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (Power Windows (Service Information)) >> Window Motor >> Removal

Window Motor: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move the window to the full UP position position, if possible.
  2. Disconnect and isolate the battery negative cable.
  3. Remove door trim panel (Refer to BODY/DOOR - FRONT/TRIM PANEL - REMOVAL) .
  4. Disconnect electrical harness connector from motor.
  5. Remove window regulator.
  6. With regulator on bench, remove three screws retaining the motor to the regulator and remove motor.
scientia non olet · About LEMON Manuals