LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Interior & Exterior (2 Of 2)) >> Weatherstrip/Seals >> Weatherstrip-Quarter Panel Outer Belt - Convertible >> Removal >> Removal - Convertible

Removal - Convertible

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Quarter Weatherstrip
GC0022607Courtesy of DAIMLERCHRYSLER CORP.
  1. Lower the convertible top.
  2. Remove the rear quarter panel trim (Refer to BODY/INTERIOR/TRIM-QUARTER PANEL REAR - REMOVAL) .
  3. Remove inner quarter panel weatherstrip (2) from the quarter panel inner flange (1) by carefully puling upward on the weatherstrip.
    Fig 2: Quarter Panel Outer Belt Weatherstrip
    GC0022606Courtesy of DAIMLERCHRYSLER CORP.
  4. Adjust the convertible top open/close to access the four screws (2) that secure the quarter panel outer belt weatherstrip (1).
  5. Remove the four screws that secure the quarter panel outer belt weatherstrip to the quarter panel (3) and remove the weatherstrip.
scientia non olet · About LEMON Manuals