LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Interior & Exterior (2 Of 2)) >> Weatherstrip/Seals >> Retainer-Header Weatherstrip - Convertible >> Removal >> Removal - Convertible

Removal - Convertible

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Weatherstrip Header Seal Retainer
GC0022604Courtesy of DAIMLERCHRYSLER CORP.
  1. Remove the header and A-pillar weatherstrip (Refer to BODY/WEATHERSTRIP/SEALS/HEADER/WEATHERSTRIP-HEADER AND A-PILLAR - REMOVAL) .
  2. Remove the five screws (1) that secure the weatherstrip header seal retainer (2) to the windshield opening frame (3) and remove the seal retainer.
scientia non olet · About LEMON Manuals