LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Interior & Exterior (2 Of 2)) >> Weatherstrip/Seals >> Retainer-A-Pillar Weatherstrip - Convertible >> Removal >> Removal-Convertible

Removal-Convertible

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: A-Pillar Weatherstrip
GC0022595Courtesy of DAIMLERCHRYSLER CORP.
  1. Remove the header and A-pillar weatherstrip (3) as necessary to gain access to the A-pillar weatherstrip retainer (1) (Refer to BODY/WEATHERSTRIP/SEALS/HEADER/WEATHERSTRIP-HEADER AND A-PILLAR - REMOVAL) .
  2. Remove the four screws (2) that secure the A-pillar weatherstrip retainer to the A-pillar (4) and remove the retainer.
scientia non olet · About LEMON Manuals