LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Interior & Exterior (2 Of 2)) >> Weatherstrip/Seals >> Rear Door Glass Run Weatherstrip >> Removal

Rear Door Glass Run Weatherstrip: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Door Striker
GC0022601Courtesy of DAIMLERCHRYSLER CORP.
1 -REAR DOOR OUTER BELT WEATHERSTRIP 6 - REAR DOOR LATCH STRIKER
2 - REAR DOOR GLASS RUN WEATHERSTRIP 7 - REAR DOOR CHECK STRAP AND COVER
3 - REAR DOOR GLASS LOWER CHANNEL REAR 8 - REAR DOOR CHECK STRAP SEAL
4 - REAR DOOR 9 - REAR DOOR GLASS LOWER CHANNEL FRONT
5 - REAR DOOR LATCH STRIKER SPACER 10 - REAR DOOR INNER BELT WEATHERSTRIP
  1. Remove door trim panel, water shield as necessary.
  2. Remove door glass.
  3. Pull weatherstrip from flange.
  4. Pull run weatherstrip from window frame channel.