LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Interior & Exterior (2 Of 2)) >> Weatherstrip/Seals >> Front And Rear Door Opening Weatherstrip >> Removal >> Convertible

Front And Rear Door Opening Weatherstrip: Removal: Convertible

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Door Opening Weatherstrip
GC0022598Courtesy of DAIMLERCHRYSLER CORP.
1 - BODY SIDE APERTURE PANEL
2 - PUSH PIN FASTENERS
3 - FRONT DOOR OPENING WEATHERSTRIP
  1. Remove door sill scuff plate. (Refer to BODY/INTERIOR/DOOR SILL TRIM - REMOVAL) .
  2. Remove four push pin fasteners (2) at the B-pillar end the weatherstrip.
  3. Pull weatherstrip from vehicle.