Sunroof Trough Guide Assembly: Installation
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - TROUGH GUIDE |
| 2 - GUIDE LINK |
- Carefully twist trough guide (1) through small slot (cut out) on track to install.
- Connect the trough guide wire to the lifter arm.
- Place the trough into position on sunroof. Ensure that the trough crosses over the top of the sunshade.
- Install the two screws that attach the trough to the trough guides (1). Tighten screws to 1 N.m (9 in. lbs.).
- Install sunroof glass panel (Refer to BODY/SUNROOF/GLASS PANEL - INSTALLATION) .