LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Interior & Exterior (2 Of 2)) >> Sunroof >> Sunroof Sunshade >> Installation

Sunroof Sunshade: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: SUNSHADE FRONT GUIDE
GC0043130Courtesy of DAIMLERCHRYSLER CORP.
1 - SUNSHADE FRONT GUIDE
2 - SCREWDRIVER DEPRESSING FRONT GUIDE
  1. From top of the vehicle through roof opening place sunshade into position, rotating rear guide feet of sunshade into opening of track.
  2. Guide front sunroof feet through front opening and into the track grooves.
  3. Set trough assembly in position on sunroof assembly. Ensure that the trough crosses over the top of the sunshade.
    Fig 2: GUIDE ASSEMBLY TROUGH
    GC0043129Courtesy of DAIMLERCHRYSLER CORP.
    1 - TROUGH
    2 - TROUGH GUIDE
    3 - SCREW
  4. Install two screws (3) attaching trough guide to trough assembly. Tighten screws to 1 N.m (9 in. lbs.).
scientia non olet · About LEMON Manuals