Sunroof Glass Panel Seal: Installation
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Always position seal seam on center side of the passenger side of glass panel.
- Place seal into position.
- Install seal on glass panel. Using care working the seal around the glass, being careful not to stretch the seal while installing.
- Replace sunroof glass panel (Refer to BODY/SUNROOF/GLASS PANEL - INSTALLATION) .
- Verify sunroof operation and alignment (Refer to BODY/SUNROOF/GLASS PANEL - ADJUSTMENTS) .