LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Interior & Exterior (2 Of 2)) >> Sunroof >> Opening Trim Lace >> Installation

Opening Trim Lace: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place trim lace into position starting at center of the opening on driver's side.
  2. Push lace into position.
  3. Ensure that the corner radii is fully engage.
  4. Once trim lace is attached to sunroof module begin tucking the headline under the lip on the trim lace working all the way around the opening.
scientia non olet · About LEMON Manuals