LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Interior & Exterior (2 Of 2)) >> Seats >> Rear Seat Latch Cover >> Installation

Rear Seat Latch Cover: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Seat Latch And Cover
GC0022560Courtesy of DAIMLERCHRYSLER CORP.
  1. Place latch cover in front of the latch. See Fig 1
  2. Slide the latch cover rearward on to the latch.
    Fig 2: Rear Seat Latch Cover
    GC0022559Courtesy of DAIMLERCHRYSLER CORP.
    1 - LOCKING TAB
  3. Ensure locking tabs (1) are locked into position. See Fig 2.
  4. Fold the rear seats rearward into position.