LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Interior & Exterior (2 Of 2)) >> Seats >> Rear Seat Bolster Cover - Convertible >> Removal >> Removal - Convertible

Removal - Convertible

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Bolster - Mounting Bracket
GC0022553Courtesy of DAIMLERCHRYSLER CORP.
  1. Remove rear seat bolster from vehicle. (Refer to BODY/SEATS/REAR SEAT BOLSTER - REMOVAL) .
  2. Remove the two bolster mounting brackets.
  3. Remove push pin fasteners from upper retainer.
    Fig 2: Bolster Cover
    GC0022554Courtesy of DAIMLERCHRYSLER CORP.
    1 - HOG RINGS
  4. Cut three hog rings (1) attaching cover together.
  5. Remove cover from foam.
scientia non olet · About LEMON Manuals