LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Interior & Exterior (2 Of 2)) >> Seats >> Rear Seat Back Cushion Cover/Foam - Pt27 >> Removal >> Removal - Convertible

Removal - Convertible

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Seat Cushion Foam
GC0022550Courtesy of DAIMLERCHRYSLER CORP.
1 - HOOK AND LOOP
2 - HOG RINGS
  1. Remove seat from vehicle. (Refer to BODY/SEATS/REAR SEAT - REMOVAL) .
  2. Remove seat back. (Refer to BODY/SEATS/REAR SEAT BACK - REMOVAL) .
  3. Disengage J-strap attaching seat cover from the seat cushion frame.
  4. Pull cover off to the hog rings.
  5. Cut hog rings (2) attaching seat cover to seat cushion pad.
    Fig 2: Rear Seat Cushion Frame
    GC0022549Courtesy of DAIMLERCHRYSLER CORP.
  6. Remove seat cushion cover and foam from seat cushion frame.
scientia non olet · About LEMON Manuals