LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Interior & Exterior (2 Of 2)) >> Seats >> Front Seat Cushion Cover >> Removal >> Coupe

Front Seat Cushion Cover: Removal: Coupe

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Disengaging J-Straps
GC0022488Courtesy of DAIMLERCHRYSLER CORP.
1 - J-STRAPS
2 - WIRE HARNESS AND SEAT CUSHION FRAME
  1. Remove seat from vehicle (Refer to BODY/SEATS/SEAT - REMOVAL) .
  2. Remove front seat cushion (Refer to BODY/SEATS/SEAT CUSHION - REMOVAL) .
  3. Disengage J-strap (1) attaching seat cover from the seat cushion frame (2) and ensure wire harness free seat frame.
    Fig 2: Remove Seat Cushion Cover And Foam
    GC0022505Courtesy of DAIMLERCHRYSLER CORP.
    1 - SEAT CUSHION COVER AND FOAM
  4. Remove seat cushion cover (1) to the hog rings.
  5. Cut hog rings attaching seat cover to seat cushion pad.
  6. Remove seat cushion cover (1) from seat cushion.
scientia non olet · About LEMON Manuals