LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Interior & Exterior (2 Of 2)) >> Seats >> Front Seat Cushion Cover >> Removal >> Convertible

Front Seat Cushion Cover: Removal: Convertible

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Disengaging J-Straps
GC0022488Courtesy of DAIMLERCHRYSLER CORP.
1 - J-STRAPS
2 - WIRE HARNESS AND SEAT CUSHION FRAME
  1. Remove seat from vehicle (Refer to BODY/SEATS/SEAT - REMOVAL) .
  2. Remove front seat cushion (Refer to BODY/SEATS/SEAT CUSHION - REMOVAL) .
  3. Disengage J-strap (1) attaching seat cover from the seat cushion frame and ensure wire harness free seat pan.
    Fig 2: Remove Seat Cushion Cover And Foam
    GC0022505Courtesy of DAIMLERCHRYSLER CORP.
    1 - SEAT CUSHION COVER AND FOAM
  4. Separate the seat cushion cover and foam from (1) the seat cushion pan.
    Fig 3: HOG RINGS
    GC0022507Courtesy of DAIMLERCHRYSLER CORP.
    1 - HOG RINGS
  5. Remove seat cushion cover back to the hog rings (1).
  6. Cut hog rings attaching seat cover to seat cushion pad.
scientia non olet · About LEMON Manuals