Removal - Convertible
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- If possible, raise the quarter glass (1) to the full up position to aid in removal.
- Remove the rear quarter trim panel (Refer to BODY/INTERIOR/TRIM-QUARTER PANEL - REMOVAL) .
- Remove the water dam from thinner quarter panel.
- Lower the convertible top.
- Disconnect the wire connector to the power window motor.
- Remove the three nuts (4) that secure the quarter window module (3) to inner quarter panel.
- Lift the quarter window module upward and out of the opening at the top of the quarter panel.
- If required, remove the three screws (5) and nuts (2) that secure the quarter glass and bushings (6) and remove the quarter glass.