LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Interior & Exterior (2 Of 2)) >> Interior >> Trunk Trim Panel - Convertible >> Removal >> Removal - Convertible

Removal - Convertible

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Trunk Trim
GC0022428Courtesy of DAIMLERCHRYSLER CORP.
1 - SEAT BACK RELEASE
2 - TRUNK SIDE TRIM PANEL(S)
3 - DECKLID SILL SCUFF PLATE
  1. Remove decklid sill scuff plate (3). (Refer to BODY/INTERIOR/DECKLID SILL SCUFF PLATE - REMOVAL) .
  2. Disconnect power outlet/cargo lamp, if equipped.
    Fig 2: Trunk Trim Panel
    GC0022427Courtesy of DAIMLERCHRYSLER CORP.
    1 - PUSH PIN FASTENER
    2 - TRUNK TRIM PANEL
    3 - PLASTIC NUT
  3. Remove push pin fastener (1) attaching trunk side trim panel (2).
  4. Pull inward on trunk side trim panel (2) to disengage clips.
  5. Remove trunk side trim panel (2) from vehicle. Repeat operation for other side.
scientia non olet · About LEMON Manuals