LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Interior & Exterior (2 Of 2)) >> Interior >> Liftgate >> Striker >> Removal

Section 114 (Interior & Exterior (2 Of 2)): Interior: Liftgate: Striker: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Decklid Latch Striker
GC0022286Courtesy of DAIMLERCHRYSLER CORP.
  1. Open the liftgate.
  2. Remove the liftgate sill scuff plate (Refer to BODY/INTERIOR/SCUFF PLATE-LIFTGATE SILL - REMOVAL) .
    NOTE: Place a reference mark along the outer edge of the striker to ensure it is reinstalled to its original position.
  3. Mark the position of the striker (1) on the liftgate opening lower panel (3) to aid installation.
  4. Remove the two screws (2) that secure the striker to the lower panel and remove the striker.
scientia non olet · About LEMON Manuals