Section 114 (Interior & Exterior (2 Of 2)): Interior: Liftgate: Cylinder-Lock: Removal
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Do not remove the E-clip from the back of the lock cylinder.
- Disconnect and isolate the negative battery cable.
- Remove the latch control (Refer to BODY/DECKLID/HATCH/LIFTGATE/TAILGATE/CONTROL-LATCH - REMOVAL) .
- Disengage the retainer clip that secures the lock cylinder (2) to the liftgate (1) and remove the lock cylinder and gasket.