Specifications - Body Gap And Flush Measurements - Convertible

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

INDEX

DESCRIPTION	FIGURE
BODY GAP AND FLUSH	Fig 1.

Fig 1: GAP AND FLUSH

GC0043145

Courtesy of DAIMLERCHRYSLER CORP.

	LOCATION	GAP	FLUSH
1	HOOD TO GRILLE	PARALLEL WITHIN 2.0	GRILLE ENDS 5.0
			GRILLE CENTER 7.0
			UNDERFLUSH +/- 1.0
2	HOOD TO FENDER	6.0 +/- 1.0 PARALLEL WITHIN 1.0	FENDER FRONT OVERFLUSH 1.5 +/- 1.0
			FENDER MIDDLE & REAR +/- 1.0
			CONSISTENT WITHIN 1.0
3	HOOD TO DOOR	5.0 +/- 1.0 PARALLEL WITHIN 1.0	+/- 1.5 CONSISTENT WITHIN 1.0
4	FRONT DOOR TO FENDER	5.2 +/- 1.0 PARALLEL WITHIN 1.0	+0.9 LOWER AREA UNDERFLUSH 1.0 +/- 1.0 CONSISTENT WITHIN 1.0
5	FENDER TO SILL	4.5 +/- 1.5 PARALLEL WITHIN 1.0	+/- 2.0 NEVER UNDERFLUSH
6	FRONT DOOR TO SILL	6.0 +/- 1.5 PARALLEL WITHIN 1.0	UNDERFLUSH 1.0 +/- 1.0
7	DOOR TO BODY SIDE	4.5 +/- 1.0 PARALLEL WITHIN 1.0	+/- 1.0 CONSISTENT WITHIN 1.0
8	BODY SIDE TO FUEL FILLER	3.0 +/- 1.0 CONSISTENT WITHIN 1.0	BODY SIDE 0.5 OVERFLUSH +/- 0.75
9	DECKLID TO BODY SIDE	4.0 +/- 1.0 PARALLEL WITHIN 1.0	DECKLID UNDERFLUSH 1.0 +/- 1.0 CONSISTENT WITHIN 1.0
10	DECKLID TO REAR FASCIA	7.0 +/- 1.5 PARALLEL WITHIN 1.0	N/A
NOTE: NOTE: ALL MEASUREMENTS ARE IN MILLIMETERS