LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Restraints System (Service Information)) >> Rear Seat Belt Buckle - Pt27 >> Removal

Rear Seat Belt Buckle - Pt27: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open door and decklid.
  2. Release the fold down rear seat and pull forward.
  3. Remove the two screws at the side of the seat cushion shield at the buckle area (1).
  4. Remove the two screws at the bottom of the cushion cover (1).
  5. Pull cushion cover back far enough to get at the seat belt buckle anchor bolt.
    Fig 1: Seat Belt Buckle Anchor Bolt
    GC0023014Courtesy of DAIMLERCHRYSLER CORP.
  6. Remove the anchor bolt (1) to the seat belt buckle and remove from seat.
scientia non olet · About LEMON Manuals