LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Restraints System (Service Information)) >> Rear Seat Belt & Retractor >> Removal

Rear Seat Belt & Retractor: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove turning loop cover.
  2. Remove turning loop bolt.
  3. Remove upper and lower trim bezels.
  4. Remove trim panel from body (Refer to BODY/INTERIOR/LEFT QUARTER TRIM PANEL - REMOVAL) .
  5. Remove lower seat belt anchor bolt.
  6. Feed seat belt and hardware through trim openings.
  7. Unbolt and remove the retractor and belt assembly.
scientia non olet · About LEMON Manuals