LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Restraints System (Service Information)) >> Front Seat Belt Height Adjuster >> Removal

Front Seat Belt Height Adjuster: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Front Shoulder Belt Adjuster
GC0020011Courtesy of DAIMLERCHRYSLER CORP.
WARNING: Front seat belt assemblies must be replaced after a collision.
  1. Remove B-pillar trim (Refer to BODY/INTERIOR/B-PILLAR TRIM - REMOVAL) .
  2. Remove the two bolts attaching front seat belt height adjuster (1) to B-pillar.
  3. Remove front seat belt height adjuster (1) from vehicle.
scientia non olet · About LEMON Manuals