LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Restraints System (Service Information)) >> Front Seat Belt Buckle >> Installation

Front Seat Belt Buckle: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Front seat belt assemblies must be replaced after a collision.
  1. Place seat belt buckle in position on seat anchor.
  2. Install bolt attaching seat belt buckle to seat. Tighten seat belt anchor bolt to 40 N.m (30 ft. lbs.) torque.
  3. Install front seat cushion side shield two screws.
  4. Install the center console (Refer to BODY/INTERIOR/CENTER CONSOLE - INSTALLATION) .
scientia non olet · About LEMON Manuals